Valve Body, Chnl Plate
Please view our Order Info page before contacting us for an order, Thank You!
 |
4T65E Reconditioned and Upgraded Valve Body $299.95* |
Our Reconditioned and Upgraded Valve Bodies are a great addition to any rebuild or to repair a transmission experiencing valve body or solenoid problems. Below is a list of what goes into every valve body that we recondition- -Thorough cleaning and inspection -Sonnax Boost Valve and Sleeve kit -Sonnax TCC Apply valve -Sonnax TCC Regulated apply valve -Sonnax Forward boost valve, 97-99 only -Cleaned and tested pressure switch manifold, replaced if found bad -All 4 solenoids replaced with new including -Pressure Control Solenoid (Borg Warner for 97-02 models) (OE Bosch style for 03+ models) -TCC Solenoid, Borg Warner -Shift Solenoids, OE Replacement *There is an additional $75 core fee unless you send in your valve body for us to use first. If your valve body is not usable then the $75 core fee will still apply. We credit the core fee back after we recieve your valve body and inspect it. 2004+ Grand Prix with Tapshift option will have a core fee of $100. |
 |
4T65EV/GT Reconditioned and Upgraded Valve Body $299.95* |
The above information also applies to the Volvo applications. *There is an additional $100 core fee unless you send in your valve body for us to use first. If your valve body is not usable then the $100 core fee will still apply. We credit the core fee back after we recieve your valve body and inspect it. |
 |
4T65E Reconditioned Channel Plate $99.95* |
Our Reconditioned channel plates are a good option when your original is damaged and in need of replacement. Below is a list of what goes into our Reconditioned channel plate- -Thorough cleaning and inspection -Sonnax AFL Valve and Sleeve kit -Sonnax TCC Relief valve -New input shaft sleeve *There is an additional $50 core fee unless you send in your channel plate for us to use first. If your original channel plate is damaged we cannot give credit for it and this fee will not be refunded. 2004+ Grand Prix with Tapshift option will have a $75 core fee |
 |
4T65EV/GT Reconditioned Channel Plate $99.95* |
The above information also applies to Volvo applications *There is an additional $100 core fee unless you send in your channel plate for us to use first. If your original channel plate is damaged we cannot give credit for it and this fee will not be refunded. |
Valve Body and Channel Plate Core Info-
ALL cores sent back to us for refund MUST be complete and match what we shipped you!
Valve body cores that are sent back to us for a core return must include the following-
-Complete valve body (This means ALL valves, springs, end plugs, clips)
-All solenoids and clips
-Pressure switch manifold and bolt/bolts to attach to valve body
-Match casting # that we sent you unless discussed prior to sale
These parts come on all of the valve bodies that we ship out. If we dont get them back with your core there will be deductions in your refund no exceptions!
Valve bodies MUST be in usable condition. If it has corrision from sitting in water, lots of metal debris and stuck valves, broken or damaged casting then it will be unacceptable and we will not honor a refund!
Channel Plate cores that are sent back-
The channel plate itself does not have many attachments or accessories installed on it. When we ship them the do not include input speed sensor or 4th accumulator so you must use your originals!
Channel plates MUST be in usable condition when sent back for a core refund! Castings with excessive chain or reluctor wheel damage will not be accepted. Corrosion or cracks that caused damage will not be acceptable.
ALL cores sent back to us for refund MUST be complete and match what we shipped you!
Valve body cores that are sent back to us for a core return must include the following-
-Complete valve body (This means ALL valves, springs, end plugs, clips)
-All solenoids and clips
-Pressure switch manifold and bolt/bolts to attach to valve body
-Match casting # that we sent you unless discussed prior to sale
These parts come on all of the valve bodies that we ship out. If we dont get them back with your core there will be deductions in your refund no exceptions!
Valve bodies MUST be in usable condition. If it has corrision from sitting in water, lots of metal debris and stuck valves, broken or damaged casting then it will be unacceptable and we will not honor a refund!
Channel Plate cores that are sent back-
The channel plate itself does not have many attachments or accessories installed on it. When we ship them the do not include input speed sensor or 4th accumulator so you must use your originals!
Channel plates MUST be in usable condition when sent back for a core refund! Castings with excessive chain or reluctor wheel damage will not be accepted. Corrosion or cracks that caused damage will not be acceptable.
