GM Standard Replacement

4T65E Standard Replacement model - $2,095.00

Please view our Custom Order Info page before contacting us for an order, Thank You!

-The pricing above is for the cost of the transmission ONLY! Installation, core fee, and shipping are additional.

- Every Transmission is built to order. We do not stock rebuilt transmissions as there are too many variations from model to model and year to year to cover everything and keep caught up with our constant incoming workload.

- For Core Fee information please click on the tab in the Transmissions section. The costs for certain damaged parts also apply to transmissions that are brought to us for a rebuild so please review this before ordering!

This is our standard 4T65E rebuild option which applies to a long list of vehicles from 1997 to current in GM front wheel drive vehicles. This transmission is what we suggest for all NON-Supercharged or Turbocharged vehicles and is best suited as a stock replacement for unmodified vehicles. If you have a Supercharged vehicle please look below at our High Performance Street/Strip model. We can either rebuild one of our transmission cores or you can supply your existing transmission for us to rebuild. There is a great deal of attention and time that goes into each and every rebuild and there are also a few common failure areas, especially in the 97-02 models, and these are addressed and upgraded during the rebuild. Every transmission that we rebuild is specifically built to match the make/model/year of the vehicle that it is going to be installed in so there are no worries of a mismatched transmission that can potentially cause compatibility problems. Every transmission is built per order. Below is a list of items that are replaced and are included as an upgrade in every 4T65E Standard version rebuild

-Thorough inspection during dissassembly
-Any questionable or excessively worn hardpart is replaced
-Hardened 4th clutch shaft
-Seals, gaskets, orings, and teflon sealing rings
-New USA made filter
-All new Borg Warner clutch plates and modified clutch stackup for improved shift feel
-New Forward apply band
-New thrust washers
-Common failure bushings replaced, others inspected and replaced as needed
-New stator support bearing
-Select bearings replaced standard, others inspected and replaced as needed
-New aftermarket input sun gear
-Reconditioned input clutch piston

-All new solenoids in valve body including
-Borg Warner PCS for 97-02, OE AC Delco/Bosch for 03+ model years
-Borg Warner TCC PWM solenoid
-OE AC Delco shift solenoids

-Pressure switch manifold cleaned and tested, replaced as needed
-Wiring harness thoroughly tested and replaced as needed
-Transgo shift kit- this is NOT a performance kit but greatly improves shift feel,
includes a few upgraded internal seals and vastly improved accumulator spring set

-Sonnax Sure-Cure kit which includes these upgraded parts
-TCC apply valve
-TCC regulated apply valve
-TCC relief valve
-Improved boost valve and sleeve
-AFL valve and sleeve
-Lube tube retainer, improved check balls, pump slide pivot pin

-Reman torque converter matched to your vehicle
-18 Month / 24K mile warranty*

Website Builder